Oregon PowerNow CS250S 14-Inch 40 Volt Max Lithium-Ion Chain Saw With Standard Battery Pack

!±8± Oregon PowerNow CS250S 14-Inch 40 Volt Max Lithium-Ion Chain Saw With Standard Battery Pack

Brand : Oregon | Rate : | Price : $399.00
Post Date : Jan 05, 2012 18:34:19 | Usually ships in 24 hours

Oregon PowerNow CS250S 14-Inch 40 Volt Max Lithium-Ion Chain Saw With Standard Battery Pack

The Oregon PowerNow CS250S 40V MAX Chainsaw Kit with Standard Battery Pack is a lithium ion battery-powered chainsaw that delivers a combination of performance and features that makes it a true alternative to many gas-powered chainsaws. For removing trees, cleaning up after a storm, pruning large branches or clearing debris from property, you can depend on the Oregon PowerNow 40V MAX Chainsaw. The Oregon PowerNow Chainsaw, with its lithium ion battery pack, offers instant starting without a pull cord, powerful cutting with no-fade power, and long runtime. It is a smarter, quieter way to work free from the hassles of gasoline or cords. When not in use, the lithium ion battery pack holds a charge for months at a time, so the PowerNow Chainsaw is ready when you are. Equipped with a 14-inch bar, the PowerNow Chainsaw can power through logs as large as 10 to 12-inches. For smaller cuts, the CS250S chainsaw goes non-stop, cutting up to 125 two to three inch branches on a single charge. This performance may vary with user technique, chain sharpness, size and type of wood. At just under 10 pounds, the PowerNow Chainsaw is lightweight, easily portable and offers ergonomic comfort. The PowerNow Chainsaw starts instantly with the pull of a trigger, no pull cords, no gas, and no warm-up times. The PowerNow Chainsaw features the PowerSharp built-in chain sharpening system so you'll never cut with a dull chain again. When the chain dulls, simply pull the PowerSharp Lever for 3 to 5 seconds with the saw running and the chain will work like new. The Oregon PowerNow CS250S Chainsaw Kit features the 1.25Ah B500S 40V MAX Battery Pack. The B500S has no memory effect, charge maintenance and full discharge is NOT necessary to retain consistent capacity throughout the life of the battery. A completely discharged battery pack will take approximately 60 minutes to charge.

More Specification..!!

Saving Consumer Reports Hair Dryers Viking Induction Stove Clearance Sale Mcclelland Scotch Order

HUSQVARNA 288XP CHAINSAW HOW TO: CLUTCH & DRIVE SPROCKET REMOVAL & INSTALLATION

!±8± HUSQVARNA 288XP CHAINSAW HOW TO: CLUTCH & DRIVE SPROCKET REMOVAL & INSTALLATION

How to Remove and reinstall the clutch and drive sprocket on your Husqvarna 288xp Chainsaw.

HUSQVARNA 288XP CHAINSAW HOW TO: CLUTCH & DRIVE SPROCKET REMOVAL & INSTALLATION

Deals For R Dvd Players Good Bargain Oakley Snowboard Goggles

Do You Know How To Measure A Chain Saw Blade And Chain?

!±8± Do You Know How To Measure A Chain Saw Blade And Chain?

Is your chainsaw starting to seem dull and not perform as well? Looks like it's time to replace the chain. In order to do this, you will need to know the length of both the chainsaw blade as well as the length and size of your chain. If you've checked out the manufacturers' charts, they might seem a little overwhelming. But it really is pretty simple once you understand what's involved in the length of the blade and chainsaw chain.

When you're ready to replace your chain, the first thing to do is determine the size of your chainsaw bar. If you happen to have an Oregon chainsaw, this should be easy. Just check the first two numbers of the ten-digit model number that is stamped on the motor end of the blade. That's your chainsaw bar length.

Don't have an Oregon chainsaw that easily shows you the length of the blade? Then here are some tips for figuring it out yourself.

What's The Best Way To Measure A Chain Saw Blade?

To measure the chainsaw blade itself is simple enough to do. Just put your measuring tape at the end of the bar up against the casing and measure straight down the bar all the way to the tip of the blade.

Blade and bar are two terms that are both used to indicate the same item. This is the blade that extends from the casing of the motor and carries the chain which is what does the sawing for you.

Manufacturers were kind enough to standardize the chainsaw blade lengths into two-inch increments. The most common sizes are 16, 18, and 20 inches although the full range goes from 10 to 42 inches! When you measure your blade, round up to the nearest 2-inch measurement if needed.

Measuring A Chainsaw Chain

To measure the chain on your chainsaw, there are two things you will need to know ... the number of drive links and the pitch of the chain.

A drive link is simply a tooth on the chain and your chain's length is determined by the number of drive links (or teeth). The pitch of the chain also affects the size of the drive links.

The pitch of the chain is important to know as it must match the pitch of both the drive sprocket as well as the bar nose sprocket. This should be stamped on the drive link but if you need to measure the pitch yourself, take the distance between any 3 rivets of the chain and divide by 2.

As an example, a 1/4" pitch chain might have 52 drive links and be 2.17 feet in length, while a 3/8" pitch with 52 drive links would be 3.18 feet in length. So the pitch affects the drive link size which affects your blade's length.

Still unsure? Just check with your chain saw's manufacturer or anyone who makes chains and they will be able to clear up any confusion you may have.

Do You Know How To Measure A Chain Saw Blade And Chain?

Elle Jewellry Discount